Hi All,
We are using SAP TM 9.1
In the Forwarding order,
we include certain document references in the item level. pls chk the attached image.
when the planning is done for the same forwarding order and on creating a Freight order from it,
these document references are not available in the freight order.
Am I missing any link? pls suggest a solution to bring in these document references from Forwarding order to Freight order.
Thanks,
Michael.
Hello SAP Users,
I am trying to Setup and STO scenario, I am facing below issue
I have create control key which has PO, Oubound and Inbound
Please let me know
Thanks
Kumar
Hello ;
Is there a possibility of Software Solution and Technology Partner of SAP having access the CSS Component
of TM for support purposes. If yes, how can this process be initiated ?
Thanks for your help in advance !
Dear Experts,
I am facing an exceptional behaviour on Freight Order.
When I am manually putting the fixing status as FIX on freight order, as shown below:
the system still allows me to change and Save the the Departure date on the Freight order.
But according to standard SAP , these dates should get locked when the FO is in FIX status and on Saving the same, there should be an Error message 'Save Cancel'.
I want to Debug the process and want to know what is the issue. Please help me in locating the code, where there is a CHECK on this Fixing Status while saving the FO.
Regards,
Ashish Goyal
Message was edited by: Michael Appleby
Dear TM Experts,
I am new to SAP TM developments. I have gone through SAP Transportation Management 8.0 / 8.1 & 9.0.
We have a requirement where we need to pass data from Z table to TURES_ID of Freight Unit structure.
We have configured automatic creation of freight unit at FUBR level. We have configured standard PI interfaces with which whenever STO or Sale order is created in ECC, OBTR is created in SAP TM which is as per our requirements.
Now, due to this FUBR configuration, Freight Units are created automatically. During this creation of Freight Unit we need to find a point for enhancing to built our own logic for picking data from Z table and passing it to Freight Unit Item structure at run time.
I tried with Determination Enhancement option with pattern B Derive Dependent Data Before Saving for BO - /SCMTMS/TOR for Create/Update and delete Nodes. When I try this from transaction - /BOBF/TEST_UI break-point stops but when I test this using Tcode - SPROXY using payload of inbound proxy our breakpoint do not stops.
I would like to know below 3 points:
1. The approach of Determination Enhancement is better approach for passing data to freight unit structure at run time from Z table or their any other better approach using which we can achieve passing data to freight unit from Z table during instance of PI interface
2. Why our breakpoint is not stopping when we are testing from Inbound proxy from SPROXY with payload data in SAP TM
3. Is their any other option where we can debug PI interface and reach to freight unit level other then SPROXY
Please refer to the attachment for details of Determination enhancement.
Please share your experience on this topic.
Thanks in advance.
Regards,
Md.Rafi
Hi Experts,
I am facing an error in SAP TM NWBC. I have created the resources in SAP GUI, but while accessing them from NWBC it gives an error that "Vehicle resource not found" even though the resource is available in the drop down selection list.
Kindly help. The screen shots are appended below :
Thanks & Regards,
Aunkur De
Hi Experts,
While I am trying to create resource in SAP TM, in the drop down for resource class I am not able to see anything. Can you please advise where can I define resource class for this drop down. Screen shot of the issue is appended herewith.
Kindly advise.
Thanks & Regards,
Aunkur De
Hi Experts,
I am facing an issue related to viewing the charges and freight settlement document in NWBC. The issues are as follows :
1. I run calculate charges function which gives a message that "Charge calculation successful" but as soon as I go into the freight order and try to view the charges tab, it gives an internal server error. (The screen shots are appended herewith)
2. Similarly when I go to freight order and as a follow up document I try to create freight settlement document, but same issue persists in this case as well. (The screen shots are appended herewith)
Kindly help me in this regard.
Thanks & Regards,
Aunkur De
Hello,
I have a question regarding sales order scheduling using SAP TM 9.1.
We have a business scenario where customer places an order with multiple items and we combine the items for a full truck load using delivery group. There may be multiple delivery group exists in the order, so every group is full truck load of delivery.
At present, we are rescheduling the order at line item level using ECC, so the customer advocates select the items in the delivery group and reschedules to get the confirmed date on the order and creates the delivery for one delivery group. The other delivery groups in the sales order will be rescheduled based on the production of the materials.
With TM 9.1 integration, we noticed that the order cannot be rescheduled at line item level and only possible to do at order level. This causes problem for us since the other items in the different delivery group is also rescheduled and the material available date is keep pushed out based on RLT or confirmed to the new dates once the product is available.
Is it possible to do the sales order scheduling using SAP TM using delivery group or at item level? Did anyone in the group implemented SAP TM and scheduled sales order using TM and faced this issue?
Your help will be greatly appreciated.
Thanks,
Kumaran
Dear TM Experts,
We are currently using Z transaction for creation of delivery in ECC.
This Z transaction was developed to consider Z fields (Carrier, Gateway & Route) which are coming from Interface. Addition to this, Z transaction is been used for consider custom enhancements which was supported by standard delivery transaction.
After TM implementation we still want to go with this Z transaction for delivery creation in ECC.
I would like to know how TM should pass this details of Z fields to ECC.
1. Can we handle this Z fields of ECC through standard interface (OutboundDeliveryBulkCreateRequest_Out & OutboundDeliveryBulkCreateRequest_In) or
2. It would require enhancing standard message interface or
3. It would require a complete custom interface for creation of delivery from SAP TM to SAP ECC.
Which is better approach for such a scenario.
Regards,
Md.Rafi
Hi Experts,
Good Evening
I want to develop a scenario on SAP TM related to traffic restrictions where a particular vehicle resource of a particular capacity cant run on few specific lanes for some days of a week. (for eg. a 2 ton truck is not allowed to run on transportation lane AB on Wednesday and Friday). Can you please advise how a similar scenario could be mapped in TM.
Thanks & Regards,
Aunkur De
Hey Guys,
at time we got heavy time difficults to import our customizing and workbench transports. we got over 70 clients in our system.
one customzing transports need 20 min. to finish.
is anybody using the parallel import discribed in note: 1127194 - R3trans import with parallel processes
can we use it for all kinds of transports or are there any hints we must know? like workbench transports in all clients?
ty for your knowledge 
Hi All,
We are trying to transport a Web Services data source from one system to another.
Details for datasource are:
Adapter: Web service Push
Fixed service name: ABC Fixed name (checked)
But there is an error in transport.
Error message is :
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS ( )
RFC destination PRDCLNT100_PC does not exist.
How can I transport this TR successfully .
Also if I try to activate this datasource through RSDS_DATASOURCE_ACTIVATE_ALL program , there is an error that there are no attributes for the datasource.
Hi,
I have a requirement to open a popup in the Freight Order general tab on click of save according to the
status of the Freight Order.
I have tried the method 'adapt_needs_confirmation' of the view exit class /SCMTMS/CL_UI_VIEWEXIT_TOR of the
Freight Order by creating a post exit in it but this method does not get triggered on Save.
It gets triggered when we change the value of some field using F4 help or dropdown.
I think this is due to the Return statement in standard code of this method.
Please give your valuable inputs regarding this issue.
Hi experts,
we have set up the Cockpit with a set of selection profiles and layouts for all users. Now, we need to set up the fields needed in the different sections of the Cockpit (FU, Resources, Freight orders).
We can personalize the views for each user, but can we really not create one view and assign it to a group of users?
Please share your experience
Thanks
Petra
Hi experts, Question from our app developper: I was wondering if it possible to include a custom CSS file in the standard NetWeaver UI? I would like to make the UI responsive. We are able to access the Tm System on the mobile phone and would like to have the Driver Change the freight order in TM. In order to make this more simple, we would like to hide a number of fields and make the screen smaller. Your answer will be highly appreciated! Many thanks! Regards Petra
Hi,
Is there any way maintain office Hours for a Business Partner (Vendor, Customers etc)
Scenario : Delivery for a customer should be made in their office hours.
How to set this up in TM?
Thanks,
Michael.
hi everybody,
i am trying to implement the badi definition /SCMB/RESTMS_SUB_ADDATTR to set additional fields into resource master data, but i am not sure about the steps to do.
someone has been implemented this badi definition ??
could you send me an little example or a guide to do this??
thank for your help..
Hi,
Does anyone have any reading material around inbound transportation and backhaul planning involving continuos moves?
I am looking for the standard SAP process design
Any help would be greatly appreciated.
Regards,
Amrit
Hi All,
I have create the Sales Order -- OTR -- FU -- and from Transportation cockpit I have created Freight Order. From Transportation Cockpit I m trying to create Delivery proposal but in Delivery proposal no information is coming and showing black data.
Thanks and Regards
Shambhu Sarkar
