Hello,
Is there any way to set up a manual shipment block, so that other users cannot do eg. PGI and shipment comoletion for that whole shipment ?
It is not enough to make a sigle delivery block, my users want to block the whole shipment, wgile awaiting for licences etc...
Thanks a lot.
Olaf
Hello.
After changing a tp paremeter , the configuration distribution towards the test system fails (it is successfull towards the production system and the development system, which is the domain controller as well).
The error is a not better specified
Internal error in TMS communication
Message no. XT115
Diagnosis
An error occurred in the communication layer of the following SAP system:
System: RT1.DOMAIN_RD1(000)
Function: RFC_MODIFY_R3_DESTINATION
Error: INTERNAL_ERROR (5)
System Response
The function terminates.
Procedure
The following internal error occurred in the TMS communication layer:
5
The TMS RFC works fine, the user is ok as well.... There is no error in the syslog either in the domain controller, nor in the test system.
Can anybody help to identify the reason of this error? The stms is working but the configuration is reported as inconsistent due to this error.
what is RCC_CUST error in SAP TM system?
Hi,
Has anyone worked on the integration between INTRAA and SAP TM and if so kindly share the input from the architecture perspective how we can leverage this in TM
standard BCV query view and dashboard is not coming under side panel.is there any customization or mapping needs to be done in system?
Hi Experts ,
Need your advice on the below scenario :
Good Example :
Sales Order with Plant XXX1 with Shipping point XX10 is successfully transferring to SAP TM 9.0 system.
Bad example where i need help in Investigation :
Sales order with Plant XXX1 with Shipping point XX20 ( Which is a dedicated Shipping point for other plant XXX2 but also available for XXX1 plant to use manually )
These sales orders are not triggered to SAP TM and in the Output is successfully triggered.
Please advice the chances where i am missing with the configuration. Please suggest ASAP. Your help here is highly appreciated
Thanks
Hello,
I am creating sales order in ECC system however system is giving short dump with the error "Internal application error of BO /SCMTMS/TRQ of component TM-FWM-FWO", so SO is not coming through to the TMS system.
Even when i use existing FO and try creating delivery order and shipment document it doesn't happen and see short dump.
When i Checked ST22 it gives this error.
"MESSAGE_TYPE_X"
"/BOBF/CL_FRW==================CP" bzw. /BOBF/CL_FRW==================CM00Z
"SET_APPLICATION_ERROR"
Message class....... /BOBF/FRW
Number.............. 013
Variable 1.......... /SCMTMS/TRQ
Variable 2.......... TM-FWM-FWO
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program /BOBF/CL_FRW==================CP
Application Component AP-RC-BOF-RNT
If you cannot solve the problem yourself, please send the following information to SAP.
Can anyone assist here please.
Regards
Anand
Hi experts,
we are trying to implement an integration between TM and ERP using a note 1978857.
But we get an error that Logical Ports are not defined for Service Groups. Where can we mainait a logical ports for this purpose?
TM Experts,
Is there a standard way to trigger Freight Order creation in TM from external systems?
My scenario is:
Regards,
Shashidhar
We are in the process of integrating ALK maps into TM. We're running into an issue when zooming in and out. It appears the coordinates being passed to ALK to retrieve the map image are not reflective of the location on the map. When zooming to a location in the mid-west, the coordinates requested through ALK are located in the Gulf of Mexico or off the coast of Africa.
Example:
When I zoom in using the mouse wheel or drag the zoom slider, this is the next image:
I was able to track the URL being sent to the ALK rest webservice (using fiddler). The coordinates being passed match the resulting image. I'm trying to figure out how the coordinates are determined for the URL in SAP.
When I do a few address searches and place them as locations on the map. They appear to be in correct location in respect to each other, but they do not display in the correct location on the map.
It seems the root problem is that SAP is requesting the wrong coordinates from ALK.
URL for initial request (I truncated the rest of the URL for easy viewing, you can see the rest of it in the config link below):
pcmiler.alk.com/APIs/REST/v1.0/Service.svc/map?style=default&PT1=-180.000000000000%2C90.000000000000&PT2=180.000000000000%2C-90.000000000000&WIDTH=2048&HEIGHT=2048
Mid-level zoom (working mostly as expected)
pcmiler.alk.com/APIs/REST/v1.0/Service.svc/map?style=default&PT1=-45.000000000000%2C33.750000000000&PT2=112.500000000000%2C-45.000000000000&WIDTH=1792&HEIGHT=1792
Close zoom (things really go poorly here)
pcmiler.alk.com/APIs/REST/v1.0/Service.svc/map?style=default&PT1=0.000000000000%2C11.250000000000&PT2=78.750000000000%2C-28.125000000000&WIDTH=1792&HEIGHT=1792
URL Format from config
Any ideas?
hi experts,
our client would like to see only the product level on the freight order item tab, just one line with the consignee number and description next to it. As posted in another thread, we made this possible (with the help of Dragos !!) for the Cockpit. Now, we woudl like to do the same for the FO item Tab. This is what we would like to achieve:
In other words, we would like to Default the hierarchy "parcel shipment" PSHP. The hierarchy type can be customized in SPRO-TM-FO Management-Define hierarchical views for freight documents.
To try to default this hierarchy, we went into FPM as follows: SE80, edit object, enter /SCMTMS/WDCC_FRE_ORDER, Display configuration, select main page (on the left), Wire Schema. Then, we have to choose the correct Config ID. We realized that you could Change the hierarchy on the config ID /SCMTMS/WDCC_TOR_OVW_GEN as follows:
But, that config id does not affect the FO item tab. OK. Why did we not Change the config id /SCMTMS/WDCC_FRE_ORDER_ITM? Sounds more like freight order items, doesn´t it? We tried to double-click it, but there is no place to Change the Parameters (see below). How can we set the hierarchy type there? or is it another config id? We could really use some help. Furthermore, we would liek to Default the view too, so that the correct fields come up for everyone. Not sure if this is possible at this place?
Thank you so much for helping us out.
Regards
Petra
Dear experts
When a FSD is transfered to ERP, a PO (Purchase Order) and SES (Service Entry Sheet) are created, but It is not possible to print this PO due to there's no output message determination for it.
I've checked the code of the BAPI_PO_CREATE1 (this is the function called for the PO creation in ECC), and I found a call to an include where is indicated the following:
"EhP5 No message for TM orders"
If ekko-statu = 'T' - Purchase Order from Transportation Management - the programm does an exception and exclude the message determination for these types of orders.
Do you know any way to solve this incident? we need to print the PO's.
Thanks for your help
Hello
I got configuration guide for SAP TM Intermodal Rail scenario for 9.2 version. Now I need step by step end to end process to run scenario explained in the configuration document. I do not find any document. Can you please explain me step by step or send me market place link to get document.
Thank you well in advance.
Dear TM group,
Has anyone implemented TM process for standard subcontracting for a shipper, i.e. movement of raw materials / components to subcontracting vendor and return movement of finished goods? A subcontracting PO is created on ECC with finished goods material as main item and components as sub items. We require one freight order from plant to vendor with components and another freight order from vendor to plant with finished material. Since this is standard ECC process, we are assuming there is a standard way to do in TM. Any inputs on how to model this process in TM along with where the cost is typically settled is greatly appreciated.
Best Regards,
KC
Hello experts,
To integrate SAP TM with SMC3 RateWare XL, TM needs to send the NMFC freight class to SMC3. The NMFC freight class is determined based on the Product Freight Group in the material master in TM correct?
So my question is, how is the Product Freight Group populated? Is this field populated as part of the material master data CIF from SAP ERP (from the Material Freight Group)? Or is it manually maintained in TM?
Thanks in advance,
Thanks,
Stan
Hello experts,
We are implementing a single instance of SAP TM for a global company.
For users in Europe, the weight and volume UoM displayed in the Transportation Cockpit needs to be KG and M3.
For users in the US, the weight and volume UoM displayed in the Transportation Cockpit needs to be LB and FT3.
As I understand it, the UoM for these dimensions is determined based on the UoM maintained in the Freight Unit Building Rule.
So my question is, is this possible?
Thanks in advance,
Stan
Object type ZWF_AP_IMG subtype of IMAGE and program ZWF_AP_O_IMAGE_APLare in different corrections.
I looked, at the BOR, hasn't been changed since 2013, was not in any other transport and I am STUCK!
I created a transport with both in it, and still same message.
Thanks,
Rick
Hi Experts ,
Need your advice on the below scenario :
Good Example :
Sales Order with Plant XXX1 with Shipping point XX10 is successfully transferring to SAP TM 9.0 system.
Bad example where i need help in Investigation :
Sales order with Plant XXX1 with Shipping point XX20 ( Which is a dedicated Shipping point for other plant XXX2 but also available for XXX1 plant to use manually )
These sales orders are not triggered to SAP TM and in the Output is successfully triggered.
Please advice the chances where i am missing with the configuration. Please suggest ASAP. Your help here is highly appreciated
Thanks
Hello,
Iam an SAP SD consultant and interested in learing SAP TM. There is an SAP press book on SAP TM but it teaches processes and config.
Iam looking for a user manual on SAP TM as to how Transactions are performed.
Can someone guide where I can get the same ?
regards
Pamela
Hi all,
This is Sowmith........
Please give me some explanation about type group and table type...